With the innovative and unique product HeltiQ Skin Tags you can remove skin tags at home in a safe, fast and effective manner.

HeltiQ Skin Tags is based on the reliable method cryotherapy (treatment by means of freezing) that has been applied for many years. A method also used by professionals and proven to be effective for freezing warts. The product consists of a dispenser containing a cryogen (aerosol gas) and a permanently fixed applicator. With the single-use disposable foam tips, which should be replaced for each skin tag treatment, you can tip and freeze the skin tag in a hygienic manner. The supplied protective patch, which should be applied around the skin tag before treatment, protects the surrounding healthy skin, which allows precise treatment.

After treatment, the skin tag usually comes off the skin after 10 to 14 days and new, healthy skin becomes visible. In most cases single application of the HeltiQ Skin Tags is sufficient to remove the skin tag.

Skin tags, also known as fibroma or acrochordons a, are soft, benign growths on the skin that look like bumps or stalks. They often occur on the neck, throat or under the armpits or breasts. Skin tags are often the same colour as your skin but they can also be darker.

You can use HeltiQ Skin Tags for the removal of skin tags. We recommend you to use HeltiQ Skin Tags only after carefully reading the instructions for use. Download the HeltiQ Skin Tags instructions for use. Determine whether you are dealing with skin tags before using HeltiQ Skin Tags.

Treatment method skin tags

Do NOT separate the clear cap from the pressurised aerosol dispenser before use

Step 1
Place a protective plaster around the skin tag to be treated. Ensure that the skin tag comes through the middle opening of the plaster.

Step 2
Insert a single-use foam tip in the opening of the cap. Hold the aerosol dispenser firmly at the cap and hold the canister down while positioning the foam tip. Do not yet place the foam tip on the skin tag.

Step 3
Turn the aerosol dispenser upside down so that the foam tip faces the ground. Hold the dispenser away from the body and do not point the dispenser in the direction of other individuals. Press the bottom of the aerosol dispenser firmly with your thumb 4 times in a row to dispel the cryogen onto the foam tip. Hold the aerosol dispenser upside down for another 10 seconds. 

Step 4

Gently press the foam tip against the skin tag for 40 seconds.
Warning! Holding the foam tip against the skin tags longer than 40 seconds could result in damage to the skin.

Step 5
Remove the protective plaster immediately after the treatment.

Step 6
Remove the foam tip from the cap by pulling the foam tip holder downwards from the opening. Discard the applicator after use.

Warning!
The disposable foam tips are for singly use only, for the treatment of one skin tag. Do not reuse the foam tip. Do not touch the surface of the foam tip with your fingers when removing the holder from the applicator opening. The foam tip is saturated with the cryogen which could lead to freezing of the skin.